RENAISSANCE ENGINEERING GROUP, INC

RÉSUMÉS

 

Stephen E. Jensen, P.E.

6840 Grover Ave.

Austin, Texas 78757

512.653.7194 [voice]

steve@reg-inc.com

title.  Principal
expertise.  Hydraulics & Hydrology
  • Design Storm Analysis for watersheds using

    • stream gage data

    •  hydrograph routing models including HEC-1 and TR-20

    • rational method calculations.

  • Watershed Master Plans for flood control combining storm drain, channel, and detention analysis and design.

  • Floodplain Models using HEC-RAS and SWMM.

  • Bridge Hydraulic Models using HEC-RAS.

  • Regional Detention Facilities for flood control.

  • On-site Detention Facilities for local runoff peak control.

  • Channel Design for flood control and stream stability.

  • Erosion Control Design for stream stability and site runoff.

  • Bridge Scour Analysis.

  • FEMA Studies (incl. LOMRs/CLOMRs).

  • Storm Drain, Culvert, and Channel Design.

  • Erosion Control Design for stream stability and site runoff.

 Site Development & Land Development
  • Roadway Design.

  • Grading.

  • Wastewater Collection and On-Site Wastewater Treatment Systems.

  • Water Distribution Layout.

  • Dry Utilities Coordination and Layout.

  • Drainage and Flood Control Facilities including detention, storm drains, and channels.

  • Water Quality Control including wet ponds, sedimentation/filtration ponds, and vegetative filter strips.

  • Permitting and Review for site plan, subdivision, and building permits.

 

projects.
  • Integrated Solutions Development for City of Austin Urban Watershed Master Plan.

  • Developed and rated projects for solving city-wide flooding problems,

  • Integrated erosion, flood, and water quality projects for optimal achievement of city goals.

  • Camino Colombia Toll Road Bridge and Culvert Hydraulics.

  • West Alto Bonito Flood Control Channel construction Plans.

  • RM 2222 Roadway Widening Project.

  • Letter of Map Revision (LOMR) for a creek in Cedar Park, TX.

  • Bridge Hydraulics for FM 619 at Mustang Cr.

  • Bridge Hydraulics for FM 973 at Brushy Cr.

  • IBM Drainage Modifications Construction Plans.

  • Tested storm drain design software and drafted user Manual (THYSYS Winstorm by TxDOT).

  • Developed THYSYS Runoff and THYSYS Culvert computer programs (TxDOT hydrologic and hydraulic software).

  • City of Georgetown Drainage Criteria Manual (including spreadsheet drainage design tools).

  • West Park Estates Subdivision.

  • Meadows of Blackhawk Subdivision.

  • Fairways of Blackhawk Subdivision.

  • Westlake Medical Center Site Plan.

  • In Town Suites Site Plan.

  • Town of Brundage Water Distribution System.

 

qualifications.
  • BSME, University of Texas at Austin, 1992

  • MSCE, University of Texas at Austin, 1994

  • Professional Engineer, State of Texas - No. 83297

experience.

Principal, Renaissance Engineering Group, Inc.

October 1999 – present

  • Hydraulics and Hydrology

  • Site Development

  • Land Development

Civil Engineer, Loomis & Moore, Inc.

October 1997 – September 1999

  • Hydraulics and Hydrology

  • Site Development

  • Land Development

Engineering Assistant, Carter & Burgess, Inc.

July 1996 – October 1997

  • Hydraulics and Hydrology

  • Highway Design

Engineering Assistant, Texas Department of Transportation, Hydraulics Section, Design Division

February 1995 – September 1999

  • Hydraulics and Hydrology

  • Software Development

  • Plan Review

Graduate Research Engineer, Applied Research Laboratories

January 1993 – February 1995

  • Mechanical Design